 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| M-Pulse Microwave Silicon Bipolar MMIC Cascadable Amplifier Features * High Dynamic Range Cascadable 50/75 Gain Block * 3dB Bandwidth: 50 MHz to 1.0 GHz * 17.0 dBm Typical P1dB @ 1.0 GHz * 12 dB Typical Gain @ 0.5 GHz * 4.0 dB Typical Noise Figure @ 1.0 GHz * Hermetic Gold-Ceramic Microstrip Package * Tape and Reel Packaging Available .040 1,02 MP4TD1170 Gold-Ceramic Microstrip Package Outline1,2 4 GND RF INPUT 1 RF OUT AND BIAS 3 .020 0,51 Description M-Pulse's MP4TD1170 is a high performance silicon bipolar MMIC housed in a hermetic high reliability package. The MP4TD1170 is designed for use in 50 or 75 systems where a high dynamic range and low distortion gain block is required. Typical applications include narrow and wide band IF and RF amplifiers in industrial and military applications. The MP4TD1170 is fabricated using a 10 GHz fT silicon bipolar technology that features gold metalization and IC passivation for increased performance and reliability. TYPICAL POWER GAIN vs FREQUENCY 14 12 Id=60mA 10 GAIN (dB) 8 6 4 2 0 0.1 1 FREQUENCY (GHz) 10 2 GND .004 .002 0,10,05 .070 1,78 .035 0,89 .495 .030 12,57 0,76 Notes: (unless otherwise specified) 1. Dimensions are in / mm 2. Tolerance: in .xxx = .005; mm .xx = .13 Pin Configuration Pin Number Pin Description 1 RF Input 2&4 AC/DC Ground 3 RF Output and DC Bias Ordering Information Model No. MP4TD1170 MP4TD1170T Units dB dB GHz dBm dB dBm ps V mV/C Package Hermetic Ceramic Tape and Reel Min. 11.5 16.0 4.5 Typ. 12.5 0.9 1.0 1.8 1.9 17.0 4.0 30.0 160 5.5 -8.0 Max. 13.5 1.1 4.5 6.5 - Electrical Specifications @ TA = +25C, Id = 60 mA, Z0 = 50 Symbol Parameters Test Conditions Gp Power Gain (S212) f = 0.1 GHz Gain Flatness f = 0.1 to 0.7 GHz Gp f3dB 3 dB Bandwidth ref 50 MHz Gain SWRin Input SWR f = 0.1 to 2.0 GHz SWRout Output SWR f = 0.1 to 2.0 GHz P1dB Output Power @ 1 dB Gain Compression f = 0.7 GHz NF f = 0.7 GHz 50 Noise Figure IP3 Third Order Intercept Point f = 1.0 GHz tD Group Delay f = 1.0 GHz Vd Device Voltage dV/dT Device Voltage Temperature Coefficient - Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ 1 FX (408) 432-3440 SiliconBipolar MMIC Cascadable Amplifier MP4TD1170 Absolute Maximum Ratings1 Parameter Absolute Maximum Device Current 90 mA Power Dissipation2,3 560 mW RF Input Power +20 dBm Junction Temperature 200C Storage Temperature -65C to +200C Thermal Resistance: jc = 135C/W 1. Exceeding these limits may cause permanent damage. 2. Case Temperature (Tc) = 25 C. 3. Derate at 7.4 mW/C for Tc > 124C. IN Typical Bias Configuration Rbias Vcc > 7.5 V Id = Vcc - Vd Rbias RFC (Optional) 4 C (DC Block) MP4TD1170 1 C (DC Block) 3 OUT Vd = 5.5 V 2 Typical Performance Curves @ Id = 60 mA, TA = +25C (unless otherwise noted) DEVICE CURRENT vs DEVICE VOLTAGE 120 Id, DEVICE CURRENT (mA) 100 RETURN LOSS (dB) 80 60 40 20 0 0 1 2 3 4 5 6 7 8 V d, D E V IC E VO L T A G E (V ) -6 -8 -1 0 RETURN LOSS vs FREQUENCY IN P U T O U TPU T -1 2 -1 4 -1 6 -1 8 -2 0 0 .1 1 F R E Q U E N C Y (G H z) 10 POWER GAIN vs CURRENT 14 12 10 GAIN (dB) 1 .0 G H z 8 6 2 .0 G H z 4 2 0 20 40 60 Id, D E V IC E C U R R E N T (m A ) 80 100 0 .1 G H z 0 .5 G H z POUT - 1dB (dBm) 21 19 23 POUT @ 1dB GAIN COMPRESSION vs FREQUENCY Id= 7 5 m A Id= 6 0 m A 17 15 Id= 4 0 m A 13 11 0. 1 1 F R E Q U E N C Y (G H z) 10 Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ 2 FX (408) 432-3440 SiliconBipolar MMIC Cascadable Amplifier NOISE FIGURE vs FREQUENCY 6 5 .5 NOISE FIGURE (dB) 5 4 .5 4 3 .5 3 0 .1 1 F R E Q U E N C Y (G H z) 10 Id= 7 5 m A Id= 6 0 m A Id= 4 0 m A REVERSE ISOLATION (dB) -3 -5 -7 -9 -1 1 -1 3 -1 5 -1 7 -1 9 0 .1 1 F R E Q U E N C Y (G H z) MP4TD1170 REVERSE ISOLATION vs FREQUENCY 10 Typical Scattering Parameters Z0 = 50, TA = +25C, Id = 60 mA Frequency S11 (GHz) 0.05 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5 2.0 Mag. 0.133 0.134 0.140 0.148 0.153 0.162 0.172 0.185 0.198 0.216 0.232 0.279 0.314 Angle -104.9 -106.7 -112.4 -118.6 -123.0 -129.9 -137.3 -144.4 -148.7 -154.6 -159.8 -179.0 164.8 Mag. 4.23 4.19 4.05 3.90 3.79 3.62 3.44 3.25 3.12 2.95 2.79 2.23 1.88 S21 Angle 157.5 156.2 151.7 146.8 143.2 137.8 131.2 124.7 120.4 114.4 108.8 89.4 74.3 Mag. 0.152 0.154 0.158 0.164 0.168 0.174 0.182 0.190 0.196 0.205 0.214 0.254 0.294 S12 Angle 14.4 14.8 16.2 17.7 18.8 20.5 22.4 24.6 26.3 28.4 30.3 35.8 38.7 Mag 0.120 0.124 0.137 0.153 0.165 0.185 0.208 0.233 0.249 0.271 0.287 0.323 0.331 S22 Angle -98.7 -100.6 -106.6 -113.1 -120.2 -125.1 -132.8 -140.8 -145.3 -151.4 -156.8 -175.4 169.7 Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ 3 FX (408) 432-3440 |
Price & Availability of MP4TD1170
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |